What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 04:36
These are simplified answers to the original question, and does not change anything I wrote above.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
In schematic diagrams this is the symbol for a fuse:
SpaceX launches 23 Starlink satellites on Falcon 9 rocket from Cape Canaveral - Spaceflight Now
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What is lightning?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
For this case there are devices called Metal oxide varistors (MOV).
eight
A circuit breaker is similar, but is resettable.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
There are two important concepts here.
I post the exact comment here.
Amazon joins the big nuclear party, buying 1.92 GW for AWS - TechCrunch
This is 'the assistant's answer'
Because the load is inductive, the current lags the voltage.(by a bit).
what exactly is a ‘surge’ protector?
Rory defends snubbing media, cites 'weird week' - ESPN
(Dc diagram shown, AC is similar).
The third is lightning and “how it gets conducted into a home.”
This device then solves the entire problem.
How likely is it that Israel would target targets in Iran if there is a full-blown conflict?
2024–10–16 [ OO OLAOYE OYEBODE ]
This is where the MOV conducts again, and dissipated the energy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What was your best unexpected reunion with your childhood best friend?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but I think this circuit , shows a few more pieces.
There are three different concepts here that are getting confused.
Google says its updated Gemini 2.5 Pro AI model is better at coding - TechCrunch
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These devices are installed between the “hot” and “neutral” and protective ground.
Cannabis use in any form directly linked to significant risk of heart damage - Earth.com
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At least they know the answer if they wanted it.
It also is a device that limits the change in current flow.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Eating green bananas can lower your risk of cancer by over 60% - The Brighter Side of News
He then describes Rainy Season and Lightning.
Upvotes:
What does a fuse do?
This is where this question deviates from being a 'generic' question, and becomes more specific.
It seems Mohan does not understand the difference between a comment and an Answer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Liquid Glass is more than skin deep on macOS Tahoe - AppleInsider
a photo is worth a thousand words.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
[old diagram got deleted by accident]
A fuse is a non-resetable over current circuit protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The bolt then partially travels down the line to your home.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
the problem then depends on "how fast does the fuse operate?".
He then asserts :
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
He then describes the function of a fuse.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–10[John johnson John Johnson ]
Now when you have a certain ac resistance, then a current flows in a loop.
This one hit behind the barn.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The other is “what does a “fuse” do?”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
An AC voltage/ current source, and an ac inductive load.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, what happens?
but this device (an Inductor) … impedes the rapid changes in the current.
One is “what exactly is in a ‘surge protector’ ? ”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At one ohm, the resistor has a maximum of 1 watt power.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But it can get overloaded, and no longer works.
Edit 2024–10.
Barnstars:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But… the neutral is now “floating” because of the 1 ohm resistance.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
[image of Common-mode choke]
First Sentence:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
nine